AD8013 |
RFQ for AD8013 Required Field |
 |
| Technical/Catalog Information | AD8013AN |
| Vendor | Analog Devices Inc |
| Category | Integrated Circuits (ICs) |
| Applications | Current Feedback |
| -3db Bandwidth | 140MHz |
| Slew Rate | 1000 V/s |
| Number of Circuits | 3 - Triple |
| Current - Supply | 3.5mA |
| Current - Output / Channel | 30mA |
| Voltage - Supply, Single/Dual (±) | 4.2 V ~ 13 V, ±2.1 V ~ 6.5 V |
| Output Type | - |
| Package / Case | 14-DIP (300 mil) |
| Packaging | Tube |
| RoHS Status | RoHS Non-Compliant |
| Other Names | AD8013AN AD8013AN |
| Product | Manufacturers | Pack | D/C |
| AD8013 | Analog Devices | SMD-14 | - |
The AD8013 is a low power, single supply, triple video amplifier. Each of the three amplifiers has 30 mA of output current, and is optimized for driving one back terminated video load (150 W) each. Each amplifier is a current feedback amplifier and features gain flatness of 0.1 dB to 60 MHz while offeringdifferential gain and phase error of 0.02% and 0.06°. This makes the AD8013 ideal for broadcast and professional video electronics.
The AD8013 offers low power of 4 mA per amplifier max and runs on a single +5 V to +13 V power supply. The outputs of each amplifier swing to within one volt of either supply rail to easily accommodate video signals. The AD8013 is unique among current feedback op amps by virtue of its large capacitive load drive. Each op amp is capable of driving large capacitive loads while still achieving rapid settling time. For instance it can settle in 18 ns driving a resistive load, and achieves 40 ns (0.1%) settling while driving 200 pF.
The outstanding bandwidth of 140 MHz along with 1000 V/ms of slew rate make the AD8013 useful in many general purpose high speed applications where a single +5 V or dual power supplies up to ±6.5 V are required. Furthermore the AD8013's high speed disable function can be used to power down the amplifier or to put the output in a high impedance state. This
can then be used in video multiplexing applications. The AD8013 is available in the industrial temperature range of 40°C to +85°C.
Features |
| Three Video Amplifiers in One Package Drives Large Capacitive LoadExcellent Video Specifications (RL = 150 V) Gain Flatness 0.1 dB to 60 MHz0.02% Differential Gain Error 0.06° Differential Phase Error Low PowerOperates on Single +5 V to +13 V Power Supplies 4 mA/Amplifier Max Power Supply Current High Speed 140 MHz Unity Gain Bandwidth (3 dB) Fast Settling Time of 18 ns (0.1%) 1000 V/ms Slew Rate High Speed Disable Function per Channel Turn-Off Time 30 ns Easy to Use 95 mA Short Circuit Current Output Swing to Within 1 V of Rails |
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . ......13.2 V Total
Internal Power Dissipation2
Plastic (N) . . . . . . . ......1.6 Watts (Observe Derating Curves)
Small Outline (R) . . ......1.0 Watts (Observe Derating Curves)
Input Voltage (Common Mode) .....Lower of ±VS or ±12.25 V
Differential Input Voltage . . . . . . . . ..Output ±6 V (Clamped)
Output Voltage Limit
Maximum . . . . . . . . . .....Lower of (+12 V from VS) or (+VS)
Minimum . . . . . . . . . ..Higher of (12.5 V from +VS) or (VS)
Output Short Circuit Duration
. . . . . . . . . . . . . . . . . . . . ...Observe Power Derating Curves
Storage Temperature Range
N and R Package . . . . . . . . . . . . . . . . . . .65°C to +125°C
Operating Temperature Range
AD8013A . . . . . . . . . . . . . . . . . . . . . . . . . . 40°C to +85°C
Lead Temperature Range (Soldering 10 sec) . . . . . . +300°C
